How to Rock Spin a Whitewater Kayak
The Rock Spin is a foundational trick, a building block to be used to get into more advanced tricks (like the splat wheel).
Choose rock wisely
The first thing you want to do is pick out a good rock that's flat on top, so that you can spin. It should be low enough to the water that you can shift your weight up onto it, but not so low in the water that you wash over the top of it before you can complete your spin. You'll notice with the rock that I've chosen here, that I spin about a foot from the left end of the rock where the water pillows up the highest, allowing me to get all the way up on top of the rock before I spin.
So here's how you do it; come in with some speed, and edge your boat slightly away from the rock. Just before you get to the rock, lean forward and plan a stroke to drive yourself up on top. You should lean back slightly to un-weight the boat as you slide up and turn the end of your stroke into a bit of a stern draw to initiate your spin.
As your hull slides up onto the rock, rotate your body sharply in the direction that you want to spin and plan a big reverse sweep stroke right next to your stern. Pivot your head around so that your eyes are looking at where you're planning your stroke.
This stroke has two purposes:
More Articles• An Introduction to Spin Momentum
• 3 Golden Rules of Whitewater Paddling
• Shoulder Safety
• Preventing Shoulder Injury
Select Kayak to View in Buyers' Guide